Heating water is required for activities such as showering, washing dishes, and doing laundry. If, on the other hand, your water heater begins to make strange noises, this could indicate a problem. These sounds, which can range from whistling and rumbling to outright hammering, are usually indicative of a malfunctioning water heater.

If your water heater is making a lot of noise, it is likely that it has some serious problems that must be addressed before it can function properly again. If you ignore the sounds from your water heater, you risk having a major accident, an explosion, excessive water damage, and excessively high energy costs.

Heating Element Failure

If the sounds coming from your water heaters northbrook il sound like buzzing, one of the heating components may have become dislodged. The heating element in your water heater may become dislodged if the appliance is not properly installed or is used frequently.

It’s possible that simply tightening the heating element on a regular basis will be enough to solve this problem:

1. To begin, you must turn off the water heater’s power supply.
2. Determine the panel that allows access to the heating element.
3. After installing the component, a wrench should be used to secure and tighten it.
4. After carefully installing the access panel, the power should be turned back on.

It is strongly advised that you seek the advice of an expert from Towers Plumbing who can repair or replace any broken components of your water heater for the best possible results.

Insufficient Flow of Water

The sound of a water heater sizzling is frequently caused by dirt obstructing water flow through one or more of the appliance’s internal valves. If you suspect a problem with the valve controlling the amount of water that enters the tank, you should contact a plumber.

The plumber will investigate whether the problem is limited to the valve or if another issue exists. Sometimes all that is required is the replacement of a damaged valve. If the obstruction is significant, the tank may require more extensive repairs when silt accumulates in the tank, and these repairs could be expensive. You should always have your water heater inspected by Towers Pluming to ensure that it is both safe and operational.

Anode Rod Aging

In water heaters, anode rods act as a sacrificial metal that corrodes in place of the tank itself. This metal contributes to the water heater’s longevity by extending its service life. The anode rods must be replaced on a regular basis, usually every three to five years.

Before you turn on the heater for the first time, take a quick picture of the anode rod. When inspecting the anode rod, you can use that image as a reference point.

Like any other metal component, the anode rod should appear sturdy and even be polished. With time, the metal will become corroded and begin to erode; it may also deteriorate and change color. After it shows signs of corrosion and wear and tear, it must be replaced.

Water Heater Repair in Alta, UT

Should you replace your water heater, or is it still functional? The professionals at Towers Plumbing can assist you in replacing your old water heater. They provide options for both tankless and traditional water heating systems. To schedule a water heater repair in Alta, UT, go to their website.